Pier replacement for Sydney homes with sunken, cracked or rotted piers. We replace old brick and timber piers with steel piers on solid footings, so your floor is level and solid again. Most jobs are done in 2 days.
Piers are the posts under your house that hold up the floor. In a lot of older Sydney homes they’re brick or timber, after enough years of wet and dry weather they sink, crack or rot.
Pier replacement means taking the weight off the old piers, removing the ones that have failed, putting in new steel piers on solid footings. Where the existing brick piers are still sound, we pack them back up to the right height instead of replacing them. That way you only pay for what actually needs doing.
Steel piers don’t rot, termites can’t touch them and they can be adjusted to get the floor properly level.
Most of the time, a sunken pier is a sign the ground under it has moved. A lot of Sydney sits on reactive clay that shrinks and swells with the weather, and the CSIRO has a good homeowner’s guide on how soil movement affects footings. If the floor has dropped, we can relevel the house at the same time, and if the timber above the piers has rotted, we’ll repair the bearers and joists while we’re under there.
If you’re noticing a few of these, it’s worth getting someone under the house to check the piers.
We get under the floor, check every pier and the timber they hold up, work out what’s failed and why. You get a fixed written quote before anything starts.
If the job needs an engineer’s design, we organise it for you. No chasing anyone yourself.
We prop the floor frame so the house is safely supported while the old piers come out.
Failed piers are removed and new steel piers go in on proper footings. Sound brick piers are packed back up to the right height and new beams go in where the floor needs extra support.
We adjust everything so the floor is level, check the doors and windows and leave the site tidy. Most jobs take about 2 days.
Every house is different, so we don’t guess a price over the phone. We come out, check the piers and give you a fixed written quote at no cost. The main things that affect the price are:
The price on your quote is the price you pay. If we find something extra once we’re under there, we show you and talk it through before doing any more work.

The owners had a floor that had gone bouncy, skirting boards pulling away from the floor, and cracks showing in the gyprock. Under the house, the old brick piers had dropped and the floor frame was sagging. We put in a new beam, installed 90x90 steel Ezipier piers and packed the existing brick piers that were still sound. The floor is solid and level again, and the whole job took 2 days.
We replace piers right across Sydney, including Western Sydney, Parramatta and the Hills, the Inner West, the North Shore, the Northern Beaches, the Eastern Suburbs, South West Sydney and the Sutherland Shire.
[Paste a real Google review here. Keep it to three or four lines.]
[Paste a real Google review here. Keep it to three or four lines.]
[Paste a real Google review here. Keep it to three or four lines.]
Tip: swap this grid for a Google reviews widget (e.g. Trustindex) so reviews stay real and update automatically.
Most pier replacement jobs take about 2 days. Bigger jobs with a lot of piers, tight access or extra timber repairs can take longer. We give you the timeframe with your quote.
Steel piers don’t rot, termites can’t damage them and they can be adjusted to get the floor exactly level. They sit on solid concrete footings, so they don’t sink the way old brick and timber piers often do.
Not always. We check every pier and only replace the ones that have failed. Brick piers that are still sound can often be packed back up to the right height, which keeps the cost down.
Some jobs need an engineer’s design, depending on how much of the house is affected. If yours does, we organise the engineer for you as part of the job.
Yes. We work from under the house, so you can keep living there as normal while the piers are replaced.
They’re the same idea. Restumping is the term usually used for timber-floored homes sitting on stumps, and pier replacement for homes on brick piers. Either way, we replace what’s failed with steel on solid footings. See our [house restumping] page for more.
A bouncy or sagging floor is usually caused by rotten or undersized bearers and joists, or by piers that have sunk or crumbled. We check both under the house, then replace the damaged timber, install new steel piers, or pack the existing piers to bring the floor back to level. Most jobs like this take [1 to 3] days.
A slightly leaning retaining wall can sometimes be repaired, but a wall that’s bulging, cracking or collapsing usually needs to be rebuilt. We excavate the old wall, compact the soil behind it and build a new one, usually in concrete sleepers, with proper drainage behind it so water pressure doesn’t push it over again.