Concrete sleeper · Block · Sandstone · Licensed builder

Retaining Walls in Sydney

Retaining walls for Sydney homes, built properly from the footings up. We build concrete sleeper, block and sandstone retaining walls and replace old walls that are leaning, cracking or collapsing, with the drainage behind them done right.

Retaining Walls Built to Last

A retaining wall holds back tonnes of soil and a lot of water when it rains. Most walls that fail don’t fail because of the sleepers or blocks. They fail because the footings weren’t deep enough, the posts weren’t set properly, or there was no drainage behind the wall.

We build retaining walls with the posts set deep in concrete, proper drainage behind the wall and everything built to the engineer’s design where it’s needed. It’s the part you can’t see once the wall is finished, and it’s the part that decides how long the wall lasts.

What goes behind the wall
Water is what pushes most walls over. When the soil behind a wall gets soaked, it gets heavier and presses harder against it. That’s why every wall we build has an ag pipe running along the base to carry water away, clean gravel backfill so water can drain down to the pipe, and fabric to stop soil clogging the gravel. Without that, even a well-built wall can start leaning after a few wet seasons.

The walls we build
We build timber sleeper walls with steel posts, concrete block walls and sandstone walls, from small garden walls to larger walls holding up driveways, pools and sloping blocks. We’ll talk you through which one suits your yard, your budget and the look you’re after.

Engineering and council approval
Taller walls, and walls near a house, a boundary or a driveway, usually need an engineer’s design and sometimes council approval. We’ll tell you at the quote whether your wall needs either, and build it to the design so it’s signed off properly.

Fixing walls that have already failed
If your wall is leaning, bulging or cracked, it’s usually cheaper to deal with it early than wait for it to come down. Sometimes the wall can be repaired. If the wall has already caused cracks in the house, we can take care of the foundation repairs or underpinning at the same time.

Signs Your Retaining Wall Needs Replacing

A failing retaining wall usually gives you warning. Don’t wait for it to come down.

How We Build Your Retaining Wall

1. Site inspection and quote

We look at the slope, the soil, how much the wall needs to hold back and where the water goes. You get a fixed written quote before we start.

2. Engineering and approvals

Walls over a certain height need an engineer’s design and council approval. If yours does, we organise the engineer and let you know what’s needed.

3. Excavate

For replacements, we dig out the old wall. Then we excavate for the new footings and posts.

4. Build the wall

We build the wall in the material that suits your site and budget: concrete sleepers between galvanised steel posts, reinforced block, or sandstone. Every wall sits on proper footings set at the right depth.

4. Drainage and backfill

We lay drainage pipe and gravel behind the wall so water can escape, then backfill and compact the soil. That’s what stops water pressure pushing the wall over later.

How Much Does a Retaining Wall Cost in Sydney?

Retaining walls are usually priced per metre, but the height, the ground and the access make a big difference. We inspect first and give you a fixed written quote at no cost. The main factors are:

The price on your quote is the price you pay. If we hit something unexpected when we dig, like rock or old footings, we show you and talk it through before going any further.

Recent jobs

Recent Retaining Wall Job

Retaining walls Sydney – new concrete sleeper wall built in front of a collapsing sandstone wall in Greystanes

Retaining Wall Replacement in Greystanes

The old sandstone retaining wall at this Greystanes home was collapsing. We removed the sections that were falling away, then built a new concrete sleeper retaining wall in front of the old one, with proper drainage behind it. Concrete sleepers won't rot like timber and with the water drained away the wall holds the soil without shifting.

Retaining Walls Across Sydney

We build and replace retaining walls right across Sydney, including Western Sydney, Parramatta and the Hills, South West Sydney, the Inner West, the North Shore, the Northern Beaches, the Eastern Suburbs and the Sutherland Shire.

Reviews

What customers say

★★★★★ [X.X] from [XX] Google reviews

[Paste a real Google review here. Keep it to three or four lines.]

[First name], [Suburb]

[Paste a real Google review here. Keep it to three or four lines.]

[First name], [Suburb]

[Paste a real Google review here. Keep it to three or four lines.]

[First name], [Suburb]

Tip: swap this grid for a Google reviews widget (e.g. Trustindex) so reviews stay real and update automatically.

FAQs

Retaining Wall FAQs

In NSW, retaining walls over 600mm high generally need council or complying development approval and an engineer’s design. Lower walls are often exempt, but it depends on your council and where the wall sits. We’ll tell you what your wall needs at the inspection.

Some smaller retaining walls don’t need council approval, but many do. The NSW Planning Portal explains the rules for retaining walls and earthworks and we’ll tell you where your wall sits when we quote. https://www.planningportal.nsw.gov.au/development-and-assessment/planning-approval-pathways/exempt-development/earthworks-retaining-walls-and-structural-supports

 

Most retaining walls take [X to Y] days, depending on the length, height, access and whether an old wall needs removing first. We give you the timeframe with your quote.

It depends on the height, the look you want and your budget. Concrete sleepers are quick to install and good value. Block walls are very strong and suit taller or engineered walls. Sandstone gives a natural, classic look that suits a lot of older Sydney homes. We’ll recommend what suits your site at the inspection.

Sometimes a slightly leaning wall can be repaired, but a wall that’s bulging, cracking or collapsing usually needs to be replaced. Patching a failing wall rarely lasts. We’ll give you an honest answer after the inspection.

When the soil behind a wall gets wet, the water pressure pushes against it, and that’s the most common reason walls fail. Drainage pipe and gravel behind the wall let the water escape, so the pressure never builds up.

It depends on which property the wall is holding up and what’s been agreed between neighbours. If your wall is on a boundary, it’s worth checking with your council.

Wall Leaning or Falling Apart? Let's Take a Look.

Send us a photo of the wall or give us a call. We’ll check it out and give you a fixed written quote for a new retaining wall or replacement.